I'm in a huge panic right now because my external HD won't mount! It's a 2TB WD Elements that's about 4'ish years old. It was working fine this morning but just now when I tried mounting it, it was seriously lagging and I thought it was a problem with my laptop so I restarted my system. After rebooting my MBP, my external drive just wouldn't mount at all and I got this error message:
- Tuxera Ntfs Could Not Mount Dev Disk1s1 At Volumes 3
- Tuxera Ntfs Could Not Mount Dev Disk1s1 At Volumes 2
Tuxera NTFS could not mount /dev/disk2s1
at /Volumes/FRANCOIS because the following
problem occured:
Aligned I/O enabled.
CBCIO enabled.
WARNING: ReadFully - I/O error while reading from
file (5: 'Input/output error')
WARNING: failed at pread(3, 0x102180000, 524288, 3220701184);
WARNING: bytesRead=0
ntfs_attr_pread_i: ntfs_pread failed: Input/output
error
Failed to calculate free MFT records: Input/output
error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run
chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f
parameter is very important! If the device is a SoftRAID/FakeRAID then
first activate
it and mount a different device under the /dev/
mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the
'dmraid' documentation
for more details.
at /Volumes/FRANCOIS because the following
problem occured:
Aligned I/O enabled.
CBCIO enabled.
WARNING: ReadFully - I/O error while reading from
file (5: 'Input/output error')
WARNING: failed at pread(3, 0x102180000, 524288, 3220701184);
WARNING: bytesRead=0
ntfs_attr_pread_i: ntfs_pread failed: Input/output
error
Failed to calculate free MFT records: Input/output
error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run
chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f
parameter is very important! If the device is a SoftRAID/FakeRAID then
first activate
it and mount a different device under the /dev/
mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the
'dmraid' documentation
for more details.
Tuxera Ntfs Could Not Mount Dev Disk1s1 At Volumes 3
Question: Q: Tuxera NTFS could not mount /dev/disk1s1 More Less Apple Footer This site contains user submitted content, comments and opinions and is for informational purposes only.
I tried mounting it on Windows but I can't access it AT ALL, I see it as a HD but there's no indication of its size etc and I even got the message error saying it needs reformatting (!!!) suggesting it's practically a blank! I don't know what to do and am near tears now.Tuxera Ntfs Could Not Mount Dev Disk1s1 At Volumes 2
- Aug 02, 2011 NTFS-3G for 64bit? Thread starter karansaraf; Start date Jul 31, 2011; Sort (Likes) Forums. NTFS-3G could not mount /dev/disk1s1 at /volumes/my book because the following problem occurred. I tried the Tuxera trail once and found it worked fine, however I decided just to reformat my drives to exFat instead of NTFS which worked.
- Sep 30, 2009 NTFS could not mount /dev/disk1s1 at /Volumes/WDBlack 1 because the following problem occurred: /Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8). The MacFUSE file system is not available (71) Thanks for any help with this one.
Please help! I have a lot of important files and data which I can't afford to lose in this HD and I really would like to recover it if possible!! Thanks!
EDIT: Gah! HELP! I tried mounting it again after a failed attempt at repairing the disk ala DiskUtility and I got these TWO error messages
Tuxera NTFS could not mount /dev/disk1s1
at /Volumes/FRANCOIS because the following problem occured:
Aligned I/O enabled.
CBCIO enabled.
WARNING: ReadFully - I/O error while reading from
file (5: 'Input/output error')
WARNING: failed at: pread(3, 0x100303400, 65536,
3221226496);
WARNING: bytesRead=0
ntfs_attr_pread_i: ntfs_pread failed: Input/output
error
Failed to read of MFT, mft=1 count 1 br=-1: Input/
output error
Failed to open inode$MFTMirr: Input/output error
Failed to load $MFTMirr: Input/output error
Failed to mount '/dev/rdisk1s1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run
chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f
parameter is very important! If the device is a SoftRAID/FakeRAID then
first activate
it and mount a different device under the /dev/
mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the
'dmraid' documentation
for more details.
at /Volumes/FRANCOIS because the following problem occured:
Aligned I/O enabled.
CBCIO enabled.
WARNING: ReadFully - I/O error while reading from
file (5: 'Input/output error')
WARNING: failed at: pread(3, 0x100303400, 65536,
3221226496);
WARNING: bytesRead=0
ntfs_attr_pread_i: ntfs_pread failed: Input/output
error
Failed to read of MFT, mft=1 count 1 br=-1: Input/
output error
Failed to open inode$MFTMirr: Input/output error
Failed to load $MFTMirr: Input/output error
Failed to mount '/dev/rdisk1s1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run
chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f
parameter is very important! If the device is a SoftRAID/FakeRAID then
first activate
it and mount a different device under the /dev/
mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the
'dmraid' documentation
for more details.
Tuxera NTFS could not mount /dev/disk1s1
at /Volumes/FRANCOIS because the following problem occured:
Aligned I/O enabled.
CBCIO enabled.
WARNING: ReadFully - I/O error while reading from
file (5: 'Input/output error')
WARNING: failed at pread(3, 0x102200000,
524288, 3220701184);
WARNING: bytesRead=0
ntfs_attr_pread_i: ntfs_pread failed: Input/output
error
Failed to calculate free MFT records: Input/output
error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run
chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f
parameter is very important! If the device is a SoftRAID/FakeRAID then
first activate
it and mount a different device under the /dev/
mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the
'dmraid' documentation
for more details.
at /Volumes/FRANCOIS because the following problem occured:
Aligned I/O enabled.
CBCIO enabled.
WARNING: ReadFully - I/O error while reading from
file (5: 'Input/output error')
WARNING: failed at pread(3, 0x102200000,
524288, 3220701184);
WARNING: bytesRead=0
ntfs_attr_pread_i: ntfs_pread failed: Input/output
error
Failed to calculate free MFT records: Input/output
error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run
chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f
parameter is very important! If the device is a SoftRAID/FakeRAID then
first activate
it and mount a different device under the /dev/
mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the
'dmraid' documentation
for more details.
